Model No.: YGT4-12
1.It has the functions of automatic counting, preset cutting number, automatic stop after work completion, and steel guiding mechanism. Compared with other similar products of other manufacturers, the straightening frame adopts the hot rolling process, the appearance is beautiful, the rigidity is stronger, the straightening effect is good; the hydraulic system is simple and reliable, does not leak oil, does not block the valve.
2. Fast cutting efficiency: Due to the use of frequency conversion controller, the maximum cutting speed of this machine is 90 m / min, which is 2-3 times of the current similar equipment.
3.The accuracy of the fixed length: due to the use of CNC shear control, the dimensional accuracy is accurate, the cut length error is ≤ ± 1mm and the adjustment is simple.
4. High straightening accuracy: the straight line height of the straightened Steel Bar is ≤2mm/m, which is higher than the precision of the similar machine and equipped with high durability tungsten steel wear block.
5. Can be broken steel: the shortest controllable cutting length is only 0.3 meters, which is impossible for the same kind of machines.
6. Low failure rate: Due to the use of PLC and frequency conversion controller, the parts are processed finely and the quality control is strict, which can guarantee trouble-free operation for a long time.It can be disassembled, easy to handle and install, and equipped with numerical control device, which can be customized according to different requirements of customers.
7. Straightening speed is fast, no error is cut, no noise, no continuous cutting, adjustable straight Φ4-Φ12 disc round bar and Φ4-Φ10 grade stud bar, suitable for all kinds of construction sites and steel bar processing.
The fully automatic CNC hydraulic bar straightening cutting machine is a machine used for straightening and rebaring of steel bars on construction sites. It is suitable for straightening and cutting of ordinary disc snails on construction sites, steel processing shops, etc. Equipped with a computer numerical control panel, easy to operate and agree to get started. This shop has a variety of models, please contact customer service for details.
Precautions for use
1. The steel bar must be cut at the middle and lower part of the tool. If it is not necessary, the upper part of the tool should not be used to avoid excessive fatigue of the tail of the machine.
2. When the shape of the fixed blade is rectangular (84x70mm/90x74mm) and the steel bar of φ32mm/38mm or less is cut, the long edge is used as the cutting edge. When cutting steel bars of φ32mm/38mm or more, use the short side to make the cutting edge, and pay attention to check whether the blade is loose during use. After the blade edge is chipped, the tool should be changed or replaced with a new one in time to avoid the cutting resistance increasing after the blade is blunt and damage other parts. (The position where the fixed blade is cut below φ32mm/38 when the machine is shipped from the factory)
Maintenance and lubrication
1. Clean all parts of dust, debris and rust in time to prevent oil from rust.
2. Always check whether the oil level in the machine cavity is above the oil mark.
3. If the machine stops working for a long time, the motor needs to be removed.
4. After the first refueling, the new oil should be replaced after one month. After 6 months, the bearing should be added with calcium grease (butter).
Straightening diameter range
Cut length error
Cut off the motor
Boron Machinery Manufacturing CO. LTD
Hebei Borong Machinery Manufacturing Co., Ltd. is a specialized private joint-stock enterprise that produces and sells wire rolling machines, CNC Steel Bar bending machine, steel bar straightening machine, steel bar cutting machine, concrete conveying pump, reducer, and other machine tools. The company was founded in 1984. The company is located in Xingjiawan Town, Xingtai City, Hebei Province, which has a long history of mechanical manufacturing. It is close to Xingde Highway, 35 kilometers away from Xingtai City. Machinery manufacturing industry park, 10 kilometers away from Xingtai City, 10 minutes by car. The company occupies an area of 108,705 square meters, a building area of 30,099 square meters, has assets of 81.99 million yuan, and 358 employees, of which 39 are senior and intermediate management personnel and engineering and technical personnel. Under the jurisdiction of machinery manufacturing companies, precision casting companies and "Jiuhuan" brand high-end radiator company. The company is a member unit of China General Machinery Parts Association, China Construction Machinery Association and Fastener Association.
In the course of more than 20 years of development, the company has consistently adhered to the development strategy of science and technology, quality and brand development, highlighting brand building and independent intellectual property rights. Hebei University of Technology, Hebei University of Science and Technology and other scientific research units and institutions of higher learning are joint collaboration units. Borong Cold Extrusion Molding Equipment Research Institute is a product research and development institution jointly established by the company and Hebei University of Technology. It aims to improve product development capabilities, upgrade product grades, and gradually form a technological innovation system that combines production, learning and research. Fully automatic thread rolling machine has been developed and applied for four patents. At present, this model has been put into trial production. The company has hired experts and professors from the above institutions to develop new products for many years. The company's thread rolling machine, reducing machine, twist anchor machine, twist cold (hot) flattening machine are all new patented products independently developed. In 2003, the company passed the ISO9001 international quality system certification. In 2004, "Bo Rong" thread rolling machine was awarded the title of high-quality product in Hebei Province.
The company's products win customers and market with the perfect combination of high-tech technology and modern craftsmanship and superior cost performance. Product sales cover 32 domestic provinces, municipalities and autonomous regions, with a domestic market share of 45% or more, and some products are exported to countries and regions such as Asia and Europe.
In order to promote the rapid development of Borong Machinery, the company plans to use five years to create the "Borong Machinery" brand into a well-known national brand. At the same time, it will establish Borong Group and form a group management by introducing new technologies and products. At present, the company is in the process of listing the "Borong Machinery" in the GEM market, and strives to meet the listing requirements within five years. After the company's listing and financing, the company's asset size can reach 500 million to 1 billion. In the future development process, Borong will continue to strengthen cooperation with colleagues from all walks of life to create a more brilliant tomorrow for the standard parts industry.
- Company Name: Boron Machinery Manufacturing CO. LTD
- Representative: Zhang Xiao Qing
- Product/Service: Thread Rolling Machine , CNC Steel Bar Bender , Concrete Transfer Pump , Numerical Control Lathe , Food Machinery , Woodworking Machinery
- Capital (Million US $): 1000000RMB
- Year Established: 2019
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 71% - 80%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 50,000-100,000 square meters
- Factory Location: 河北省邢台市邢湾镇工业区
- Contact Person: Mr. Zhu
- Tel: 86--19933233332
Premium Related Products